Xian Yunyi Instrument Co., Ltd.

Pressure Transmitters, Pressure Gauge, Pressure Calibrator, Dead Weight Tester

water pressure detector

Posted on | 四月 12, 2019 | No Comments

water pressure detector

water pressure detector

water pressure detector

Description water pressure detector:
china cheap pin connector pressure transmitter 4-20ma uses diffused silicon imported chips, circuit signal isolation amplifier, cutoff frequency interference design (anti-interference ability, lightning) overvoltage protection, current limiting protection, impact and corrosion. Hydraulic pressure sensor housing full seal welded 316 stainless steel, compact, compact, good moisture resistance and excellent media compatibility.

Basic parameters water pressure detector:
Measurement Range: 0-0.1bar to 0-1000bar
Piezoresistive sensor and thin-film sensor technology
Standard ranges available from stock
4-20 mA 2-wire output signal, others available
Highly resistant to pressure spikes and vibration
Stainless steel case and wetted parts
Can be assembled to diaphragm seals for special applications

Appliaiton water pressure detector
Mechanical manufacturer
Hydraulics and pneumatics
Test equipment
Pump and compressor control
Liquid level measurement\

Materials water pressure detector:
1.Wetted parts: 316L stainless steel
2.Shell: 304
3.Seals: Viton, optional: EPOM, NBR
4.Diaphragm: 316L stainless steel

Contact:
Sunny Zhang
Whatsapp/wechat: 86 15191864975
Email: sunny@7pressuregage.com

analog water pressure sensor

Posted on | 四月 12, 2019 | No Comments

analog water pressure sensor

analog water pressure sensor

analog water pressure sensor

Description analog water pressure sensor:
analog water pressure sensor uses diffused silicon imported chips, circuit signal isolation amplifier, cutoff frequency interference design (anti-interference ability, lightning) overvoltage protection, current limiting protection, impact and corrosion. Hydraulic pressure sensor housing full seal welded 316 stainless steel, compact, compact, good moisture resistance and excellent media compatibility.

Basic parameters analog water pressure sensor:
Measurement Range: 0-0.1bar to 0-1000bar
Piezoresistive sensor and thin-film sensor technology
Standard ranges available from stock
4-20 mA 2-wire output signal, others available
Highly resistant to pressure spikes and vibration
Stainless steel case and wetted parts
Can be assembled to diaphragm seals for special applications

Appliaiton analog water pressure sensor
Mechanical manufacturer
Hydraulics and pneumatics
Test equipment
Pump and compressor control
Liquid level measurement\

Materials analog water pressure sensor:
1.Wetted parts: 316L stainless steel
2.Shell: 304
3.Seals: Viton, optional: EPOM, NBR
4.Diaphragm: 316L stainless steel

Contact:
Sunny Zhang
Whatsapp/wechat: 86 15191864975
Email: sunny@7pressuregage.com

psi pressure sensor

Posted on | 四月 12, 2019 | No Comments

psi pressure sensor

psi pressure sensor

psi pressure sensor

Description psi pressure sensor:
psi pressure sensor uses diffused silicon imported chips, circuit signal isolation amplifier, cutoff frequency interference design (anti-interference ability, lightning) overvoltage protection, current limiting protection, impact and corrosion. Hydraulic pressure sensor housing full seal welded 316 stainless steel, compact, compact, good moisture resistance and excellent media compatibility.

Basic parameters psi pressure sensor:
Measurement Range: 0-0.1bar to 0-1000bar
Piezoresistive sensor and thin-film sensor technology
Standard ranges available from stock
4-20 mA 2-wire output signal, others available
Highly resistant to pressure spikes and vibration
Stainless steel case and wetted parts
Can be assembled to diaphragm seals for special applications

Appliaiton psi pressure sensor
Mechanical manufacturer
Hydraulics and pneumatics
Test equipment
Pump and compressor control
Liquid level measurement\

Materials psi pressure sensor:
1.Wetted parts: 316L stainless steel
2.Shell: 304
3.Seals: Viton, optional: EPOM, NBR
4.Diaphragm: 316L stainless steel

Contact:
Sunny Zhang
Whatsapp/wechat: 86 15191864975
Email: sunny@7pressuregage.com

subminiature pressure sensor

Posted on | 四月 12, 2019 | No Comments

subminiature pressure sensor

subminiature pressure sensor

subminiature pressure sensor

Description subminiature pressure sensor:
china cheap pin connector pressure transmitter 4-20ma uses diffused silicon imported chips, circuit signal isolation amplifier, cutoff frequency interference design (anti-interference ability, lightning) overvoltage protection, current limiting protection, impact and corrosion. Hydraulic pressure sensor housing full seal welded 316 stainless steel, compact, compact, good moisture resistance and excellent media compatibility.

Basic parameters subminiature pressure sensor:
Measurement Range: 0-0.1bar to 0-1000bar
Piezoresistive sensor and thin-film sensor technology
Standard ranges available from stock
4-20 mA 2-wire output signal, others available
Highly resistant to pressure spikes and vibration
Stainless steel case and wetted parts
Can be assembled to diaphragm seals for special applications

Appliaiton subminiature pressure sensor
Mechanical manufacturer
Hydraulics and pneumatics
Test equipment
Pump and compressor control
Liquid level measurement\

Materials subminiature pressure sensor:
1.Wetted parts: 316L stainless steel
2.Shell: 304
3.Seals: Viton, optional: EPOM, NBR
4.Diaphragm: 316L stainless steel

Contact:
Sunny Zhang
Whatsapp/wechat: 86 15191864975
Email: sunny@7pressuregage.com

ceramic pressure transducer

Posted on | 四月 12, 2019 | No Comments

ceramic pressure transducer

ceramic pressure transducer

ceramic pressure transducer

Description ceramic pressure transducer:
ceramic pressure transducer uses diffused silicon imported chips, circuit signal isolation amplifier, cutoff frequency interference design (anti-interference ability, lightning) overvoltage protection, current limiting protection, impact and corrosion. Hydraulic pressure sensor housing full seal welded 316 stainless steel, compact, compact, good moisture resistance and excellent media compatibility.

Basic parameters ceramic pressure transducer:
Measurement Range: 0-0.1bar to 0-1000bar
Piezoresistive sensor and thin-film sensor technology
Standard ranges available from stock
4-20 mA 2-wire output signal, others available
Highly resistant to pressure spikes and vibration
Stainless steel case and wetted parts
Can be assembled to diaphragm seals for special applications

Appliaiton ceramic pressure transducer
Mechanical manufacturer
Hydraulics and pneumatics
Test equipment
Pump and compressor control
Liquid level measurement\

Materials ceramic pressure transducer:
1.Wetted parts: 316L stainless steel
2.Shell: 304
3.Seals: Viton, optional: EPOM, NBR
4.Diaphragm: 316L stainless steel

Contact ceramic pressure transducer:
Sunny Zhang
Whatsapp/wechat: 86 15191864975
Email: sunny@7pressuregage.com

force pressure sensor

Posted on | 四月 12, 2019 | No Comments

force pressure sensor

force pressure sensor

force pressure sensor

Description force pressure sensor:
china cheap pin connector pressure transmitter 4-20ma uses diffused silicon imported chips, circuit signal isolation amplifier, cutoff frequency interference design (anti-interference ability, lightning) overvoltage protection, current limiting protection, impact and corrosion. Hydraulic pressure sensor housing full seal welded 316 stainless steel, compact, compact, good moisture resistance and excellent media compatibility.

Basic parameters force pressure sensor:
Measurement Range: 0-0.1bar to 0-1000bar
Piezoresistive sensor and thin-film sensor technology
Standard ranges available from stock
4-20 mA 2-wire output signal, others available
Highly resistant to pressure spikes and vibration
Stainless steel case and wetted parts
Can be assembled to diaphragm seals for special applications

Appliaiton force pressure sensor
Mechanical manufacturer
Hydraulics and pneumatics
Test equipment
Pump and compressor control
Liquid level measurement\

Materials force pressure sensor:
1.Wetted parts: 316L stainless steel
2.Shell: 304
3.Seals: Viton, optional: EPOM, NBR
4.Diaphragm: 316L stainless steel

Contact force pressure sensor:
Sunny Zhang
Whatsapp/wechat: 86 15191864975
Email: sunny@7pressuregage.com

yokogawa pressure transmitter

Posted on | 四月 12, 2019 | No Comments

yokogawa pressure transmitter

yokogawa pressure transmitter

yokogawa pressure transmitter

Description yokogawa pressure transmitter:
china cheap pin connector pressure transmitter 4-20ma uses diffused silicon imported chips, circuit signal isolation amplifier, cutoff frequency interference design (anti-interference ability, lightning) overvoltage protection, current limiting protection, impact and corrosion. Hydraulic pressure sensor housing full seal welded 316 stainless steel, compact, compact, good moisture resistance and excellent media compatibility.

Basic parameters yokogawa pressure transmitter:
Measurement Range: 0-0.1bar to 0-1000bar
Piezoresistive sensor and thin-film sensor technology
Standard ranges available from stock
4-20 mA 2-wire output signal, others available
Highly resistant to pressure spikes and vibration
Stainless steel case and wetted parts
Can be assembled to diaphragm seals for special applications

Appliaiton yokogawa pressure transmitter
Mechanical manufacturer
Hydraulics and pneumatics
Test equipment
Pump and compressor control
Liquid level measurement\

Materials yokogawa pressure transmitter:
1.Wetted parts: 316L stainless steel
2.Shell: 304
3.Seals: Viton, optional: EPOM, NBR
4.Diaphragm: 316L stainless steel

Contact yokogawa pressure transmitter:
Sunny Zhang
Whatsapp/wechat: 86 15191864975
Email: sunny@7pressuregage.com

differential pressure meter

Posted on | 四月 12, 2019 | No Comments

differential pressure meter

differential pressure meter

differential pressure meter

Description differential pressure meter:
differential pressure meter uses diffused silicon imported chips, circuit signal isolation amplifier, cutoff frequency interference design (anti-interference ability, lightning) overvoltage protection, current limiting protection, impact and corrosion. Hydraulic pressure sensor housing full seal welded 316 stainless steel, compact, compact, good moisture resistance and excellent media compatibility.

Basic parameters differential pressure meter:
Measurement Range: 0-0.1bar to 0-1000bar
Piezoresistive sensor and thin-film sensor technology
Standard ranges available from stock
4-20 mA 2-wire output signal, others available
Highly resistant to pressure spikes and vibration
Stainless steel case and wetted parts
Can be assembled to diaphragm seals for special applications

Appliaiton differential pressure meter
Mechanical manufacturer
Hydraulics and pneumatics
Test equipment
Pump and compressor control
Liquid level measurement\

Materials differential pressure meter:
1.Wetted parts: 316L stainless steel
2.Shell: 304
3.Seals: Viton, optional: EPOM, NBR
4.Diaphragm: 316L stainless steel

Contact differential pressure meter:
Sunny Zhang
Whatsapp/wechat: 86 15191864975
Email: sunny@7pressuregage.com

oem pressure sensor

Posted on | 四月 12, 2019 | No Comments

oem pressure sensor

oem pressure sensor

oem pressure sensor

Description oem pressure sensor:
oem pressure sensor uses diffused silicon imported chips, circuit signal isolation amplifier, cutoff frequency interference design (anti-interference ability, lightning) overvoltage protection, current limiting protection, impact and corrosion. Hydraulic pressure sensor housing full seal welded 316 stainless steel, compact, compact, good moisture resistance and excellent media compatibility.

Basic parameters oem pressure sensor:
Measurement Range: 0-0.1bar to 0-1000bar
Piezoresistive sensor and thin-film sensor technology
Standard ranges available from stock
4-20 mA 2-wire output signal, others available
Highly resistant to pressure spikes and vibration
Stainless steel case and wetted parts
Can be assembled to diaphragm seals for special applications

Appliaiton oem pressure sensor
Mechanical manufacturer
Hydraulics and pneumatics
Test equipment
Pump and compressor control
Liquid level measurement\

Materials oem pressure sensor:
1.Wetted parts: 316L stainless steel
2.Shell: 304
3.Seals: Viton, optional: EPOM, NBR
4.Diaphragm: 316L stainless steel

Contact oem pressure sensor:
Sunny Zhang
Whatsapp/wechat: 86 15191864975
Email: sunny@7pressuregage.com

pt pressure transmitter

Posted on | 四月 12, 2019 | No Comments

pt pressure transmitter

pt pressure transmitter

pt pressure transmitter

Description pt pressure transmitter:
pt pressure transmitter is a series pressure transmitter of our standard transmitter. Imported chip assembly, reflecting a world-class pressure transmitter technology.
Compact, rugged. Light weight, easy to install. Easy to use. Maintenance-free. Zero
outside the range can be continuously adjusted, a wide range of migration. Suitable
for a variety of occasions in harsh environments and corrosive media.

Basic parameters pt pressure transmitter:
1.Measuring media: oil, water, gas and other media compatible with 316L stainless
steel
2.Sensor: Stainless diffused silicon
3.Range: Gas: -0.1MPa ~ 0 ~ 100MPa; minimum range: 0 ~ 1KPa (clean air)
Liquid: -0.1MPa ~ 0 ~ 100MPa; minimum range: 0 ~ 5KPa
Positive and negative pressure type: ± 1KPa (clean gas); ± 10KPa
(liquid); maximum: -0.1 ~ 70MPa (custom)
3.Pressure: 2 times the range (10MPa or less, more may contact); 1.5 times the range
(10MPa or more, higher may contact)
4.Accuracy: ± 0.25% FS
5.Nonlinear: <± 0.2% FS 6.Hysteresis and repeatability: ≤ ± 0.1% FS 7.Long-term stability: ≤ ± 0.1% FS / year 8.Zero drift: ≤ ± 0.02% FS / ℃ 9.Response time: ≤500ms (standard) Electrical parameters: 1.Output: current 2-wire: 4 ~ 20mA 2.3-wire voltage: 0 ~ 5V; 0 ~ 10V; 1 ~ 5V; 1 ~ 10V 3.Supply voltage: DC24V (12 ~ 32VDC, less may contact) 4.Load capacity: current output: ≤ 500Ω 5.Voltage output: ≤ 250Ω output impedance 6.Electrical connection: Standard for HE Mann, optional direct outlet or custom Materials: 1.Wetted parts: 316L stainless steel 2.Shell: 304 3.Seals: Viton, optional: EPOM, NBR 4.Diaphragm: 316L stainless steel Contact: Sunny Zhang Whatsapp/wechat: 86 15191864975 Email: sunny@7pressuregage.com

thin pressure sensor

Posted on | 四月 1, 2019 | No Comments

thin pressure sensor

thin pressure sensor

thin pressure sensor

Description thin pressure sensor:
YD31 pressure transmitter is a series pressure transmitter of our standard transmitter. Imported chip assembly, reflecting a world-class pressure transmitter technology.
Compact, rugged. Light weight, easy to install. Easy to use. Maintenance-free. Zero
outside the range can be continuously adjusted, a wide range of migration. Suitable
for a variety of occasions in harsh environments and corrosive media.

Basic parameters:
1.Measuring media: oil, water, gas and other media compatible with 316L stainless
steel
2.Sensor: Stainless diffused silicon
3.Range: Gas: -0.1MPa ~ 0 ~ 100MPa; minimum range: 0 ~ 1KPa (clean air)
Liquid: -0.1MPa ~ 0 ~ 100MPa; minimum range: 0 ~ 5KPa
Positive and negative pressure type: ± 1KPa (clean gas); ± 10KPa
(liquid); maximum: -0.1 ~ 70MPa (custom)
3.Pressure: 2 times the range (10MPa or less, more may contact); 1.5 times the range
(10MPa or more, higher may contact)
4.Accuracy: ± 0.25% FS
5.Nonlinear: <± 0.2% FS 6.Hysteresis and repeatability: ≤ ± 0.1% FS 7.Long-term stability: ≤ ± 0.1% FS / year 8.Zero drift: ≤ ± 0.02% FS / ℃ 9.Response time: ≤500ms (standard) Electrical parameters: 1.Output: current 2-wire: 4 ~ 20mA 2.3-wire voltage: 0 ~ 5V; 0 ~ 10V; 1 ~ 5V; 1 ~ 10V 3.Supply voltage: DC24V (12 ~ 32VDC, less may contact) 4.Load capacity: current output: ≤ 500Ω 5.Voltage output: ≤ 250Ω output impedance 6.Electrical connection: Standard for HE Mann, optional direct outlet or custom Materials: 1.Wetted parts: 316L stainless steel 2.Shell: 304 3.Seals: Viton, optional: EPOM, NBR 4.Diaphragm: 316L stainless steel Contact: Sunny Zhang Whatsapp/wechat: 86 15191864975 Email: sunny@7pressuregage.com

remote pressure sensor

Posted on | 四月 1, 2019 | No Comments

remote pressure sensor

remote pressure sensor

remote pressure sensor

Description remote pressure sensor:
YD31 pressure transmitter is a series pressure transmitter of our standard transmitter. Imported chip assembly, reflecting a world-class pressure transmitter technology.
Compact, rugged. Light weight, easy to install. Easy to use. Maintenance-free. Zero
outside the range can be continuously adjusted, a wide range of migration. Suitable
for a variety of occasions in harsh environments and corrosive media.

Basic parameters:
1.Measuring media: oil, water, gas and other media compatible with 316L stainless
steel
2.Sensor: Stainless diffused silicon
3.Range: Gas: -0.1MPa ~ 0 ~ 100MPa; minimum range: 0 ~ 1KPa (clean air)
Liquid: -0.1MPa ~ 0 ~ 100MPa; minimum range: 0 ~ 5KPa
Positive and negative pressure type: ± 1KPa (clean gas); ± 10KPa
(liquid); maximum: -0.1 ~ 70MPa (custom)
3.Pressure: 2 times the range (10MPa or less, more may contact); 1.5 times the range
(10MPa or more, higher may contact)
4.Accuracy: ± 0.25% FS
5.Nonlinear: <± 0.2% FS 6.Hysteresis and repeatability: ≤ ± 0.1% FS 7.Long-term stability: ≤ ± 0.1% FS / year 8.Zero drift: ≤ ± 0.02% FS / ℃ 9.Response time: ≤500ms (standard) Electrical parameters: 1.Output: current 2-wire: 4 ~ 20mA 2.3-wire voltage: 0 ~ 5V; 0 ~ 10V; 1 ~ 5V; 1 ~ 10V 3.Supply voltage: DC24V (12 ~ 32VDC, less may contact) 4.Load capacity: current output: ≤ 500Ω 5.Voltage output: ≤ 250Ω output impedance 6.Electrical connection: Standard for HE Mann, optional direct outlet or custom Materials: 1.Wetted parts: 316L stainless steel 2.Shell: 304 3.Seals: Viton, optional: EPOM, NBR 4.Diaphragm: 316L stainless steel Contact: Sunny Zhang Whatsapp/wechat: 86 15191864975 Email: sunny@7pressuregage.com

isolated pressure sensor

Posted on | 四月 1, 2019 | No Comments

isolated pressure sensor

isolated pressure sensor

isolated pressure sensor

Description isolated pressure sensor:
YD31 pressure transmitter is a series pressure transmitter of our standard transmitter. Imported chip assembly, reflecting a world-class pressure transmitter technology.
Compact, rugged. Light weight, easy to install. Easy to use. Maintenance-free. Zero
outside the range can be continuously adjusted, a wide range of migration. Suitable
for a variety of occasions in harsh environments and corrosive media.

Basic parameters:
1.Measuring media: oil, water, gas and other media compatible with 316L stainless
steel
2.Sensor: Stainless diffused silicon
3.Range: Gas: -0.1MPa ~ 0 ~ 100MPa; minimum range: 0 ~ 1KPa (clean air)
Liquid: -0.1MPa ~ 0 ~ 100MPa; minimum range: 0 ~ 5KPa
Positive and negative pressure type: ± 1KPa (clean gas); ± 10KPa
(liquid); maximum: -0.1 ~ 70MPa (custom)
3.Pressure: 2 times the range (10MPa or less, more may contact); 1.5 times the range
(10MPa or more, higher may contact)
4.Accuracy: ± 0.25% FS
5.Nonlinear: <± 0.2% FS 6.Hysteresis and repeatability: ≤ ± 0.1% FS 7.Long-term stability: ≤ ± 0.1% FS / year 8.Zero drift: ≤ ± 0.02% FS / ℃ 9.Response time: ≤500ms (standard) Electrical parameters: 1.Output: current 2-wire: 4 ~ 20mA 2.3-wire voltage: 0 ~ 5V; 0 ~ 10V; 1 ~ 5V; 1 ~ 10V 3.Supply voltage: DC24V (12 ~ 32VDC, less may contact) 4.Load capacity: current output: ≤ 500Ω 5.Voltage output: ≤ 250Ω output impedance 6.Electrical connection: Standard for HE Mann, optional direct outlet or custom Materials: 1.Wetted parts: 316L stainless steel 2.Shell: 304 3.Seals: Viton, optional: EPOM, NBR 4.Diaphragm: 316L stainless steel Contact: Sunny Zhang Whatsapp/wechat: 86 15191864975 Email: sunny@7pressuregage.com

water differential pressure transmitter

Posted on | 四月 1, 2019 | No Comments

water differential pressure transmitter

water differential pressure transmitter

water differential pressure transmitter

Description water differential pressure transmitter:
YD31 pressure transmitter is a series pressure transmitter of our standard transmitter. Imported chip assembly, reflecting a world-class pressure transmitter technology.
Compact, rugged. Light weight, easy to install. Easy to use. Maintenance-free. Zero
outside the range can be continuously adjusted, a wide range of migration. Suitable
for a variety of occasions in harsh environments and corrosive media.

Basic parameters:
1.Measuring media: oil, water, gas and other media compatible with 316L stainless
steel
2.Sensor: Stainless diffused silicon
3.Range: Gas: -0.1MPa ~ 0 ~ 100MPa; minimum range: 0 ~ 1KPa (clean air)
Liquid: -0.1MPa ~ 0 ~ 100MPa; minimum range: 0 ~ 5KPa
Positive and negative pressure type: ± 1KPa (clean gas); ± 10KPa
(liquid); maximum: -0.1 ~ 70MPa (custom)
3.Pressure: 2 times the range (10MPa or less, more may contact); 1.5 times the range
(10MPa or more, higher may contact)
4.Accuracy: ± 0.25% FS
5.Nonlinear: <± 0.2% FS 6.Hysteresis and repeatability: ≤ ± 0.1% FS 7.Long-term stability: ≤ ± 0.1% FS / year 8.Zero drift: ≤ ± 0.02% FS / ℃ 9.Response time: ≤500ms (standard) Electrical parameters: 1.Output: current 2-wire: 4 ~ 20mA 2.3-wire voltage: 0 ~ 5V; 0 ~ 10V; 1 ~ 5V; 1 ~ 10V 3.Supply voltage: DC24V (12 ~ 32VDC, less may contact) 4.Load capacity: current output: ≤ 500Ω 5.Voltage output: ≤ 250Ω output impedance 6.Electrical connection: Standard for HE Mann, optional direct outlet or custom Materials: 1.Wetted parts: 316L stainless steel 2.Shell: 304 3.Seals: Viton, optional: EPOM, NBR 4.Diaphragm: 316L stainless steel Contact: Sunny Zhang Whatsapp/wechat: 86 15191864975 Email: sunny@7pressuregage.com

atex pressure sensor

Posted on | 四月 1, 2019 | No Comments

atex pressure sensor

atex pressure sensor

atex pressure sensor

Description atex pressure sensor:
YD31 pressure transmitter is a series pressure transmitter of our standard transmitter. Imported chip assembly, reflecting a world-class pressure transmitter technology.
Compact, rugged. Light weight, easy to install. Easy to use. Maintenance-free. Zero
outside the range can be continuously adjusted, a wide range of migration. Suitable
for a variety of occasions in harsh environments and corrosive media.

Basic parameters:
1.Measuring media: oil, water, gas and other media compatible with 316L stainless
steel
2.Sensor: Stainless diffused silicon
3.Range: Gas: -0.1MPa ~ 0 ~ 100MPa; minimum range: 0 ~ 1KPa (clean air)
Liquid: -0.1MPa ~ 0 ~ 100MPa; minimum range: 0 ~ 5KPa
Positive and negative pressure type: ± 1KPa (clean gas); ± 10KPa
(liquid); maximum: -0.1 ~ 70MPa (custom)
3.Pressure: 2 times the range (10MPa or less, more may contact); 1.5 times the range
(10MPa or more, higher may contact)
4.Accuracy: ± 0.25% FS
5.Nonlinear: <± 0.2% FS 6.Hysteresis and repeatability: ≤ ± 0.1% FS 7.Long-term stability: ≤ ± 0.1% FS / year 8.Zero drift: ≤ ± 0.02% FS / ℃ 9.Response time: ≤500ms (standard) Electrical parameters: 1.Output: current 2-wire: 4 ~ 20mA 2.3-wire voltage: 0 ~ 5V; 0 ~ 10V; 1 ~ 5V; 1 ~ 10V 3.Supply voltage: DC24V (12 ~ 32VDC, less may contact) 4.Load capacity: current output: ≤ 500Ω 5.Voltage output: ≤ 250Ω output impedance 6.Electrical connection: Standard for HE Mann, optional direct outlet or custom Materials: 1.Wetted parts: 316L stainless steel 2.Shell: 304 3.Seals: Viton, optional: EPOM, NBR 4.Diaphragm: 316L stainless steel Contact: Sunny Zhang Whatsapp/wechat: 86 15191864975 Email: sunny@7pressuregage.com

keep looking »

About

Chinese instrument serving the world,We are specializing in agenting Japanese Yokogawa pressure transmitter and American Rosemount pressure transmitter, and other precise pressure gauge products. They are widely used in chemical, petroleum, paper, electricity, city gas, environmental protection, water treatment and other fields...
E-mail: sunny@7pressuregage.com
Phone: (86) 2988611928

Good product