Finally,rosemount 3051 transmitter has made its great changes on hardware.There are two obvious changes that should be noticed,the first is rosemount 3051 gets new electronics and a new 8 character two-line LCD display.the second is that 3051 will also receive the 3051 HART updated housing and covers,which will allow the same housing and covers to be used on both HART and FF devices.

You can continus to buy spare parts for their existing 3051 Rev 7,more than that,you can upgrade your existing 3051 Rev 7 to the new revisions.

How can I update my existing 3051 Rev 7 to the new revision?

1. If you have an installed LCD display, replace it with the newversion. The new electronics and LCD display will work in the old housing and with the old covers. Upgrade kits will be included in updated spare parts lists.

2. Install new DD’s and DTM™’s into your control and asset management hosts.

3. Then decommission the old device, and commission the upgraded device as an “unlike device replacement”.

Visual identification on new Revision 8 3051

1. New electronics
2. New electronics label
3. New LCD display connector location
4. New 2-line 8 character display
5. Standard dept cover
6. Full wrap-around tag