High performance valve manifolds of high pressure , 1/8"-2" size

High performance valve manifolds of high pressure , 1/8"-2" size

Quick Detail:

1. Prime,High Quality
2. Standards:NPT,BSP,ISO,DIN
4. Certificates:ISO9001:2008, CE

5. Brand Name: TF

6. Place of Origin: China (Mainland)

Description:

2 - valve manifold valves manifold with high pressure used of Industrial

Two Valve Manifolds are the most commonly used manifolds. They may be provided with test ports on the process sides and drain ports on the instrument side for drawing of the process and instrument lines respectively.

TF series instrument manifolds are used for static&hydraulic pressure based on the transmitter for pressure,

differential pressure,flow rate, liquid level and etc at home or abroad.3-valve &5-valve manifolds are designed for

differential pressure.there are many kinds of structure types and end connections for model selection.All the

instrument manifolds have been widely used in engineer projects of oil refining, chemical industry, electrics,

coal-to-hydroxide, metallurgy, nuclear power and so on.

Controlled by a group of needle valves made of stainless steel.The function of each valve(pressure-shutting off,pressure drainage or pressure balancing ) is determined by its definite position on the manifolds.All

these functions by its definite position on the manifolds.All these functions are undertaken by two kinds of needle

valves;needle valves with big bonnet are used for manifolds with nominal diameter of 0.156in(4.0mm),and needle

valves with small bonnet are used for the manifolds with nominal diameter of 0.125in(3.2mm).

Characteristics

1. Press up to 6000psig (414bar) for standard stainless steel body
2. Temperature for PTFE packing from -65°F to 450°F (-54°C to 232°C)
Temperature for Grafoil packing from -65°F to 1200°F (-54°C to 649°C)
3. Packing below stem thread isolates the thread lubricant from the media
4. Back seating design protects the packing in fully open position
5. Non-rotating stem tip
6. 100% factory tested
7. Orifice:0.157" (4.0mm),CV:0.35

Applications:

Two Valve Manifolds are the most commonly used manifolds. They may be provided with test ports on the process sides and drain ports on the instrument side for drawing of the process and instrument lines respectively.

Specifications:

Competitive Advantage:

• The stem threads rolled to reduce friction

• Stem threads are coated with silver teflon mixture to allow for smooth operation.

• The stem plug has swivelling design and uniquely hardened to provide for wear and long life.

• The pipe sealing system to prevent blowout of the stem and reduce gland leakage.