Standard-Druckminderer
Posted on | 6月 5, 2019 | No Comments
beschreibung der Norm druckminderer regler
Thi Standard druckminderer regler mit einstufige membran vakuum struktur, edelstahl membran druck übertragung, der ausgangsdruck ist stabil, geeignet für reine gase, standard gase, korrosiven gasen, flüssigkeiten und andere mittel.
spezifikation von Standard druckminderer regler
1. Die maximale eingangsdruck: 3000 psi
2. Der ausgangsdruck: psi
3. Sicherheit prüfdruck: 1,5 mal max eingangsdruck
4. Anwendbar temperatur:-40 & #8457; ~ + 165 & #8457; (-40 & #8451; ~ + 74 & #8451;)
5. leckrate: 2×10-8 atm cc/sec Er
6. CV wert: 0,2
7. Gewicht: Über 1,5 kg
8. Paket größe: 17 cm * 17 cm * 17 cm
9. Material: edelstahl
merkmal der Standard druckminderer regler
1. einstufige typ relief struktur
2. Mütterlichen und membran verwenden harten dichtung form
3. Die interne struktur einfach zu purge und mit filter
4. verwenden Können panel oder wandmontage
Material von Standard druckminderer regler
körper: 316L/SS304
sitz: PCTFE, Vespel
kolben: 316L
o-ringe: Viton
die anwendung der Norm druckminderer regler
Gas Analyse Test
labor
petrochemie
Kraftwerk Ausrüstung
Einstufige druckregler und sicher ventil
Posted on | 6月 5, 2019 | No Comments
Beschreibung der einzelnen bühne druckregler und sicher ventil
YR31 einstufige druckregler und sicher ventil, einstufige membran typ oder kolben druck reduzierung struktur, stabile ausgangs druck. Diese druckregler angewendet zu reinen gase, standard gase und korrosiven gasen und so weiter, die maximale eingangs druck ist 6000 psig.
Spezifikation der einzelnen bühne druckregler und sicher ventil
1. die maximale eingangs druck: 6000 psi
2. die ausgang druck: 500psi
3. sicherheit test druck: 1,5 mal max einlass druck
4. anwendbar temperatur:-40℉ ~ + 165℉ (-40℃ ~ + 74℃)
5. leck rate: 2×10-8 atm cc/sec Er
6. CV wert: 0,2
7. paket größe: 17 cm * 17 cm * 17 cm
8. Material: edelstahl
Struktur der einzelnen bühne druckregler und sicher ventil
1. Single bühne typ relief struktur
2. mütterlichen und membran verwenden harten dichtung form
3. die interne struktur einfach zu purge und mit filter
4. verwenden können panel oder wand montage
Material der einzelnen bühne druckregler und sicher ventil
Körper: 316L/SS304
Sitz: PCTFE, Vespel
Kolben: 316L
O-ringe: Viton
Die anwendung der einzelnen bühne druckregler und sicher ventil
Gas Analyse Test
Labor
Petrochemie industrie
Kraftwerk Ausrüstung
Gegendruckregelventil
Posted on | 6月 5, 2019 | No Comments
beschreibung zurück druckregelventil
diese art zurück druckregler mit einstufige membran vakuum struktur, edelstahl membran druck übertragung, der ausgangsdruck ist stabil, geeignet für reine gase, standard gase, korrosiven gasen, flüssigkeiten und andere mittel.
spezifikation von back druckregelventil
1. Die maximale eingangsdruck: 3000 psi
2. Der ausgangsdruck: psi
3. Sicherheit prüfdruck: 1,5 mal max eingangsdruck
4. Anwendbar temperatur:-40 & #8457; ~ + 165 & #8457; (-40 & #8451; ~ + 74 & #8451;)
5. leckrate: 2×10-8 atm cc/sec Er
6. CV wert: 0,2
7. Gewicht: Über 1,5 kg
8. Paket größe: 17 cm * 17 cm * 17 cm
9. Material: edelstahl
zurück druckregelventil Charakteristik
1. einstufige typ relief struktur
2. Mütterlichen und membran verwenden harten dichtung form
3. Die interne struktur einfach zu purge und mit filter
4. verwenden Können panel oder wandmontage
Wasser elektromagnetischer Durchflussmesser
Posted on | 6月 5, 2019 | No Comments
Beschreibung von wasser elektromagnetische durchflussmesser
Wasser elektromagnetische durchflussmesser besteht aus zwei teile, die sensor und konverter. Die elektromagnetische flowmeteris auf der grundlage der arbeit von faradayschen gesetz von elektromagnetische induktion, verwendet zu messen die leitfähigkeit ist größer als 5μS/cm leitfähigen flüssigkeit volumendurchsatz rate, elektromagnetische durchflussmesser ist ein maß der volumenstrom von leitende medium für induktion meter. Zusätzlich zu messen die volumenstrom von leitfähigen flüssigkeit, der durchflussmesser kann auch verwendet werden, um messen die volumen einer homogenen flüssigkeit solide twophase fluss von einem flüssigkeit suspension von säure und alkali und andere starke ätzende flüssigkeiten und schlämmen, zellstoff und papier zellstoff
Funktion von wasser elektromagnetische durchflussmesser
1. LCD display der konverter.
2. automatische alarm funktionen für selfdiagnosis, leere last test, hohe und niedrige begrenzung der fluss, zwei-bühne fluss wert, etc.
3. es ist nicht nur zu allgemeine prozess, aber auch in tough anwendungen wie bergbau, papierherstellung, gebäck, etc.
4. hochdruck sensor mit PFA liner ist beständig gegen hohe druck und negative druck, und verfügbar zu chemie und ätzende lösung.
Anwendung von wasser elektromagnetische durchflussmesser
• Chemikalien
• Eisen, Stahl & Metalle
• Mineralien & Bergbau
• Pharma
• Power Pflanzen
• & Zellstoff Papier
• Wasser
• Abwasser
Die verwendung von wasser elektromagnetische durchflussmesser
1. trinkwasser versorgung, etc.
2. chemische säure, lye, leitfähigen lösung, kühlung flüssigkeit, additive usw.
3. trinken wasser, bier, wein, alkohol, milch, joghurt, fruchtsaft, sirup, blut etc.
4. kälte/klimaanlage und kälte thermische messung, oder wärmeenergie.
5. abwasser, industrielle abwasser entladung, abwasser usw
6. die textil industrie von wasser, pigmente, chemikalien, bleichen chemikalien usw.
Kolben struktur inline luftdruck regler
Posted on | 6月 5, 2019 | No Comments
Beschreibung von kolben struktur inline luftdruck regler
Kolben struktur inline luftdruck reglerMit einstufige membran vakuum struktur, edelstahl membran druck übertragung, die ausgang druck ist stabil, geeignet für reine gase, standard gase, korrosiven gasen, flüssigkeiten und andere medium.
Spezifikation
Artikel
Kolben struktur inline luftdruck regler
Max einlass druck palette
0-3000psi
Struktur
Diraphragm
Design Proof Druck
150% von bewertet einlass
Eltern interface gewinde
NPT “1/4 (F)
Anwendbar temperatur
40℃ ~ 74℃ (-40℉ ~ 165℉)
Interne leck rate
2 x 10-8atm.cc/sec Er
Fluss Kapazität
Cv = 1,0 Cv = 1,8 (Optional)
Körper material
316L
Sitz material
PCTFE, Vespel
Kolben
316L
O-ringe
Viton
Verwandte key worte
Regulierung vavle, druck regelventil
Anwendung
Applicaltion von kolben struktur inline luftdruck regler
• Komponente Prüfung
• Kalibrierung Systeme
• Labor Druck Control
• Hohe Druck Probenahme Systeme
• Service & Test Ausrüstung
Merkmale
Merkmale der kolben struktur inline luftdruck regler
1. Single bühne typ relief struktur
2. mütterlichen und membran verwenden harten dichtung form
3. die interne struktur einfach zu purge und mit filter
4. verwenden können panel oder wand montage
water pressure detector
Posted on | 4月 12, 2019 | No Comments
water pressure detector
Description water pressure detector:
china cheap pin connector pressure transmitter 4-20ma uses diffused silicon imported chips, circuit signal isolation amplifier, cutoff frequency interference design (anti-interference ability, lightning) overvoltage protection, current limiting protection, impact and corrosion. Hydraulic pressure sensor housing full seal welded 316 stainless steel, compact, compact, good moisture resistance and excellent media compatibility.
Basic parameters water pressure detector:
Measurement Range: 0-0.1bar to 0-1000bar
Piezoresistive sensor and thin-film sensor technology
Standard ranges available from stock
4-20 mA 2-wire output signal, others available
Highly resistant to pressure spikes and vibration
Stainless steel case and wetted parts
Can be assembled to diaphragm seals for special applications
Appliaiton water pressure detector
Mechanical manufacturer
Hydraulics and pneumatics
Test equipment
Pump and compressor control
Liquid level measurement\
Materials water pressure detector:
1.Wetted parts: 316L stainless steel
2.Shell: 304
3.Seals: Viton, optional: EPOM, NBR
4.Diaphragm: 316L stainless steel
Contact:
Sunny Zhang
Whatsapp/wechat: 86 15191864975
Email: sunny@7pressuregage.com
analog water pressure sensor
Posted on | 4月 12, 2019 | No Comments
analog water pressure sensor
Description analog water pressure sensor:
analog water pressure sensor uses diffused silicon imported chips, circuit signal isolation amplifier, cutoff frequency interference design (anti-interference ability, lightning) overvoltage protection, current limiting protection, impact and corrosion. Hydraulic pressure sensor housing full seal welded 316 stainless steel, compact, compact, good moisture resistance and excellent media compatibility.
Basic parameters analog water pressure sensor:
Measurement Range: 0-0.1bar to 0-1000bar
Piezoresistive sensor and thin-film sensor technology
Standard ranges available from stock
4-20 mA 2-wire output signal, others available
Highly resistant to pressure spikes and vibration
Stainless steel case and wetted parts
Can be assembled to diaphragm seals for special applications
Appliaiton analog water pressure sensor
Mechanical manufacturer
Hydraulics and pneumatics
Test equipment
Pump and compressor control
Liquid level measurement\
Materials analog water pressure sensor:
1.Wetted parts: 316L stainless steel
2.Shell: 304
3.Seals: Viton, optional: EPOM, NBR
4.Diaphragm: 316L stainless steel
Contact:
Sunny Zhang
Whatsapp/wechat: 86 15191864975
Email: sunny@7pressuregage.com
psi pressure sensor
Posted on | 4月 12, 2019 | No Comments
psi pressure sensor
Description psi pressure sensor:
psi pressure sensor uses diffused silicon imported chips, circuit signal isolation amplifier, cutoff frequency interference design (anti-interference ability, lightning) overvoltage protection, current limiting protection, impact and corrosion. Hydraulic pressure sensor housing full seal welded 316 stainless steel, compact, compact, good moisture resistance and excellent media compatibility.
Basic parameters psi pressure sensor:
Measurement Range: 0-0.1bar to 0-1000bar
Piezoresistive sensor and thin-film sensor technology
Standard ranges available from stock
4-20 mA 2-wire output signal, others available
Highly resistant to pressure spikes and vibration
Stainless steel case and wetted parts
Can be assembled to diaphragm seals for special applications
Appliaiton psi pressure sensor
Mechanical manufacturer
Hydraulics and pneumatics
Test equipment
Pump and compressor control
Liquid level measurement\
Materials psi pressure sensor:
1.Wetted parts: 316L stainless steel
2.Shell: 304
3.Seals: Viton, optional: EPOM, NBR
4.Diaphragm: 316L stainless steel
Contact:
Sunny Zhang
Whatsapp/wechat: 86 15191864975
Email: sunny@7pressuregage.com
subminiature pressure sensor
Posted on | 4月 12, 2019 | No Comments
subminiature pressure sensor
Description subminiature pressure sensor:
china cheap pin connector pressure transmitter 4-20ma uses diffused silicon imported chips, circuit signal isolation amplifier, cutoff frequency interference design (anti-interference ability, lightning) overvoltage protection, current limiting protection, impact and corrosion. Hydraulic pressure sensor housing full seal welded 316 stainless steel, compact, compact, good moisture resistance and excellent media compatibility.
Basic parameters subminiature pressure sensor:
Measurement Range: 0-0.1bar to 0-1000bar
Piezoresistive sensor and thin-film sensor technology
Standard ranges available from stock
4-20 mA 2-wire output signal, others available
Highly resistant to pressure spikes and vibration
Stainless steel case and wetted parts
Can be assembled to diaphragm seals for special applications
Appliaiton subminiature pressure sensor
Mechanical manufacturer
Hydraulics and pneumatics
Test equipment
Pump and compressor control
Liquid level measurement\
Materials subminiature pressure sensor:
1.Wetted parts: 316L stainless steel
2.Shell: 304
3.Seals: Viton, optional: EPOM, NBR
4.Diaphragm: 316L stainless steel
Contact:
Sunny Zhang
Whatsapp/wechat: 86 15191864975
Email: sunny@7pressuregage.com
ceramic pressure transducer
Posted on | 4月 12, 2019 | No Comments
ceramic pressure transducer
Description ceramic pressure transducer:
ceramic pressure transducer uses diffused silicon imported chips, circuit signal isolation amplifier, cutoff frequency interference design (anti-interference ability, lightning) overvoltage protection, current limiting protection, impact and corrosion. Hydraulic pressure sensor housing full seal welded 316 stainless steel, compact, compact, good moisture resistance and excellent media compatibility.
Basic parameters ceramic pressure transducer:
Measurement Range: 0-0.1bar to 0-1000bar
Piezoresistive sensor and thin-film sensor technology
Standard ranges available from stock
4-20 mA 2-wire output signal, others available
Highly resistant to pressure spikes and vibration
Stainless steel case and wetted parts
Can be assembled to diaphragm seals for special applications
Appliaiton ceramic pressure transducer
Mechanical manufacturer
Hydraulics and pneumatics
Test equipment
Pump and compressor control
Liquid level measurement\
Materials ceramic pressure transducer:
1.Wetted parts: 316L stainless steel
2.Shell: 304
3.Seals: Viton, optional: EPOM, NBR
4.Diaphragm: 316L stainless steel
Contact ceramic pressure transducer:
Sunny Zhang
Whatsapp/wechat: 86 15191864975
Email: sunny@7pressuregage.com
force pressure sensor
Posted on | 4月 12, 2019 | No Comments
force pressure sensor
Description force pressure sensor:
china cheap pin connector pressure transmitter 4-20ma uses diffused silicon imported chips, circuit signal isolation amplifier, cutoff frequency interference design (anti-interference ability, lightning) overvoltage protection, current limiting protection, impact and corrosion. Hydraulic pressure sensor housing full seal welded 316 stainless steel, compact, compact, good moisture resistance and excellent media compatibility.
Basic parameters force pressure sensor:
Measurement Range: 0-0.1bar to 0-1000bar
Piezoresistive sensor and thin-film sensor technology
Standard ranges available from stock
4-20 mA 2-wire output signal, others available
Highly resistant to pressure spikes and vibration
Stainless steel case and wetted parts
Can be assembled to diaphragm seals for special applications
Appliaiton force pressure sensor
Mechanical manufacturer
Hydraulics and pneumatics
Test equipment
Pump and compressor control
Liquid level measurement\
Materials force pressure sensor:
1.Wetted parts: 316L stainless steel
2.Shell: 304
3.Seals: Viton, optional: EPOM, NBR
4.Diaphragm: 316L stainless steel
Contact force pressure sensor:
Sunny Zhang
Whatsapp/wechat: 86 15191864975
Email: sunny@7pressuregage.com
yokogawa pressure transmitter
Posted on | 4月 12, 2019 | No Comments
yokogawa pressure transmitter
Description yokogawa pressure transmitter:
china cheap pin connector pressure transmitter 4-20ma uses diffused silicon imported chips, circuit signal isolation amplifier, cutoff frequency interference design (anti-interference ability, lightning) overvoltage protection, current limiting protection, impact and corrosion. Hydraulic pressure sensor housing full seal welded 316 stainless steel, compact, compact, good moisture resistance and excellent media compatibility.
Basic parameters yokogawa pressure transmitter:
Measurement Range: 0-0.1bar to 0-1000bar
Piezoresistive sensor and thin-film sensor technology
Standard ranges available from stock
4-20 mA 2-wire output signal, others available
Highly resistant to pressure spikes and vibration
Stainless steel case and wetted parts
Can be assembled to diaphragm seals for special applications
Appliaiton yokogawa pressure transmitter
Mechanical manufacturer
Hydraulics and pneumatics
Test equipment
Pump and compressor control
Liquid level measurement\
Materials yokogawa pressure transmitter:
1.Wetted parts: 316L stainless steel
2.Shell: 304
3.Seals: Viton, optional: EPOM, NBR
4.Diaphragm: 316L stainless steel
Contact yokogawa pressure transmitter:
Sunny Zhang
Whatsapp/wechat: 86 15191864975
Email: sunny@7pressuregage.com
differential pressure meter
Posted on | 4月 12, 2019 | No Comments
differential pressure meter
Description differential pressure meter:
differential pressure meter uses diffused silicon imported chips, circuit signal isolation amplifier, cutoff frequency interference design (anti-interference ability, lightning) overvoltage protection, current limiting protection, impact and corrosion. Hydraulic pressure sensor housing full seal welded 316 stainless steel, compact, compact, good moisture resistance and excellent media compatibility.
Basic parameters differential pressure meter:
Measurement Range: 0-0.1bar to 0-1000bar
Piezoresistive sensor and thin-film sensor technology
Standard ranges available from stock
4-20 mA 2-wire output signal, others available
Highly resistant to pressure spikes and vibration
Stainless steel case and wetted parts
Can be assembled to diaphragm seals for special applications
Appliaiton differential pressure meter
Mechanical manufacturer
Hydraulics and pneumatics
Test equipment
Pump and compressor control
Liquid level measurement\
Materials differential pressure meter:
1.Wetted parts: 316L stainless steel
2.Shell: 304
3.Seals: Viton, optional: EPOM, NBR
4.Diaphragm: 316L stainless steel
Contact differential pressure meter:
Sunny Zhang
Whatsapp/wechat: 86 15191864975
Email: sunny@7pressuregage.com
oem pressure sensor
Posted on | 4月 12, 2019 | No Comments
oem pressure sensor
Description oem pressure sensor:
oem pressure sensor uses diffused silicon imported chips, circuit signal isolation amplifier, cutoff frequency interference design (anti-interference ability, lightning) overvoltage protection, current limiting protection, impact and corrosion. Hydraulic pressure sensor housing full seal welded 316 stainless steel, compact, compact, good moisture resistance and excellent media compatibility.
Basic parameters oem pressure sensor:
Measurement Range: 0-0.1bar to 0-1000bar
Piezoresistive sensor and thin-film sensor technology
Standard ranges available from stock
4-20 mA 2-wire output signal, others available
Highly resistant to pressure spikes and vibration
Stainless steel case and wetted parts
Can be assembled to diaphragm seals for special applications
Appliaiton oem pressure sensor
Mechanical manufacturer
Hydraulics and pneumatics
Test equipment
Pump and compressor control
Liquid level measurement\
Materials oem pressure sensor:
1.Wetted parts: 316L stainless steel
2.Shell: 304
3.Seals: Viton, optional: EPOM, NBR
4.Diaphragm: 316L stainless steel
Contact oem pressure sensor:
Sunny Zhang
Whatsapp/wechat: 86 15191864975
Email: sunny@7pressuregage.com
pt pressure transmitter
Posted on | 4月 12, 2019 | No Comments
pt pressure transmitter
Description pt pressure transmitter:
pt pressure transmitter is a series pressure transmitter of our standard transmitter. Imported chip assembly, reflecting a world-class pressure transmitter technology.
Compact, rugged. Light weight, easy to install. Easy to use. Maintenance-free. Zero
outside the range can be continuously adjusted, a wide range of migration. Suitable
for a variety of occasions in harsh environments and corrosive media.
Basic parameters pt pressure transmitter:
1.Measuring media: oil, water, gas and other media compatible with 316L stainless
steel
2.Sensor: Stainless diffused silicon
3.Range: Gas: -0.1MPa ~ 0 ~ 100MPa; minimum range: 0 ~ 1KPa (clean air)
Liquid: -0.1MPa ~ 0 ~ 100MPa; minimum range: 0 ~ 5KPa
Positive and negative pressure type: ± 1KPa (clean gas); ± 10KPa
(liquid); maximum: -0.1 ~ 70MPa (custom)
3.Pressure: 2 times the range (10MPa or less, more may contact); 1.5 times the range
(10MPa or more, higher may contact)
4.Accuracy: ± 0.25% FS
5.Nonlinear: <± 0.2% FS
6.Hysteresis and repeatability: ≤ ± 0.1% FS
7.Long-term stability: ≤ ± 0.1% FS / year
8.Zero drift: ≤ ± 0.02% FS / ℃
9.Response time: ≤500ms (standard)
Electrical parameters:
1.Output: current 2-wire: 4 ~ 20mA
2.3-wire voltage: 0 ~ 5V; 0 ~ 10V; 1 ~ 5V; 1 ~ 10V
3.Supply voltage: DC24V (12 ~ 32VDC, less may contact)
4.Load capacity: current output: ≤ 500Ω
5.Voltage output: ≤ 250Ω output impedance
6.Electrical connection: Standard for HE Mann, optional direct outlet or custom
Materials:
1.Wetted parts: 316L stainless steel
2.Shell: 304
3.Seals: Viton, optional: EPOM, NBR
4.Diaphragm: 316L stainless steel
Contact:
Sunny Zhang
Whatsapp/wechat: 86 15191864975
Email: sunny@7pressuregage.com